Many men are dissatisfied with the parameters of their sexual organ and do not want to come to terms with it.Therefore, various techniques are used to help make the penis thicker and longer.A device such as a penis enlargement pump is also widely used.
Functional principle of the device
A pump is a device with a cylindrical shape.The device is designed to increase the length and width of a man's penis, as well as to increase erection.
The pump works according to a simple principle.When used, pressure is created around the male penis, which helps increase blood flow and fill the hollow bodies with blood.The same happens as with an erection.The penis very quickly becomes hard and swells, which allows you to increase its parameters.
Types of pumps and pumping
A pump for penis enlargement, regardless of type, has a simple structural principle.It is a transparent flask with centimeters on it.There are also devices with which a vacuum is created and the necessary pressure is maintained.
There are three types of pumps:
- Manual.The vacuum is created using a piston or bulb.Such devices have a lower price, so they are often used.But men have to wait quite a long time for the effect of their use.
- Automatic.With this type of pump, the pressure in the flask is created by an electric pump, which is already built into the unit.It requires batteries to operate.Automatic units are more preferable as they are highly efficient and allow you to control pressure and suction power.
- Aquatic.The newest type of pump.It differs in that water is used instead of air.This type of enlarger is safer, more effective, has few contraindications and lasts much longer than previous models.
Pumping is done in two ways.The first is called packing.Its essence is to stretch the tunic and increase the penis in length, but not in width.To do this, you need to use a narrow flask, where the penis will not swell to the sides, but will stretch upwards.
During exercises, safety precautions must be observed.

The second method is classic pumping.In this case, a wide flask is used, where the penis has the ability to swell in all directions.This allows you to increase the width and length of the organ.
Selection criteria
The enlarging pump is selected taking into account the size of the penis and the purpose of its use.Experts recommend the following:
- The length of the unit must be approx.3 cm longer.
- The width must be 2 cm greater than the diameter of the penis.
- For beginners, it is recommended to choose the manual type of device, as it is the simplest.
The above penis sizes are only considered in a state of arousal.
During the buying process, you should also pay attention to the materials from which the magnifier is made.The plunger must be strong enough to avoid accidental damage to the male organ.
Contraindications
Men suffering from the following pathologies must not use a vacuum enlarger:
- Thrombosis.
- Fibrosis.
- Liver diseases.
- Kidney diseases.
- Diabetes mellitus.
- Pathologies of the heart and blood vessels.
- Sexually transmitted diseases.
- Malfunction of the urinary organs.
If a man is not sure that he can use a pump to increase the length and width of the penis, then it is worth visiting a doctor for an examination.
Advantages and disadvantages
A vacuum pump not only allows men to make their dignity longer and wider.The device also helps improve erectile function and prolong intercourse by reducing organ sensitivity.In addition, the device allows you to adjust the shape of the penis, even if there is curvature.
The negative aspects of the pump appear only when it is used incorrectly.Failure to follow the instructions has many unpleasant consequences.
Effect of use
If you use the pump constantly, after 6 months the penis will change its size forever.To achieve maximum effect, it is recommended to simultaneously take medication that increases the production of sex hormones in men.But this can be done only after consulting a doctor.

It is worth knowing that a pump and a penis enlargement pump are the same.
Those who have already tried the pump note that they were able to achieve the desired result.After six months, the length of the penis increases by 3 cm and the thickness by 2 cm.
Instructions for use
To use a vacuum pump for penis enlargement, you do not need any special skills.Before the procedure, the device must be treated with lubricant to ensure sliding.
The male penis must be lubricated with a special cream, the effect of which allows you to normalize blood flow and increase the flow of blood to the penis.
Then place the penis in the cylinder.Remove air from the flask to create a vacuum environment.As soon as redness appears on the skin, wait 30 seconds and start the air.The procedure should not last more than 15-20 minutes.
Possible consequences
It is not for nothing that special instructions have been made for using the pump.Carrying out all manipulations strictly in accordance with it allows you to avoid negative consequences.But sometimes men ignore the rules.
As a result, instead of the desired centimeters, the following is obtained:
- The appearance of a raised ring at the base of the head of the penis.This happens due to stagnation of lymph fluid.This phenomenon may occur even if the vacuum unit is used correctly.If this side effect occurs, you should stop using the device.
- Swelling of the penis due to the influx of large amounts of lymph.
- Impairment of erectile function.
- Redness of the penis, bleeding.
- Thrombosis.The disease poses a huge threat to human life, but is extremely rare when using a pump.
To avoid negative consequences, it is important not only to use the pump correctly.It is also necessary not to ignore the presence of contraindications to its use.If they are, then you should look for other ways to enlarge the penis.
Homemade devices
For men who do not want to spend money on buying a factory enlargement, there is an opportunity to make one at home with your own hands.
From a cuff pump
To create an airless environment, unscrew the cuff pump and turn the cuff over.Then reassemble the unit, but in reverse order.
Next, you need to make a valve that is designed to release excess air.For this purpose, you can use a valve from an aquarium compressor.It should be connected to the application hose and sealed.
From the compressor
You can take a compressor from unnecessary refrigeration equipment.After removing the evaporator and condenser, cut the pipes connecting them.Then connect the compressor to the network.

The pump helps, but a greater effect is achieved by taking medication containing testosterone or using an extender at the same time as using the pump.
Get an air filter from any auto shop.It must be attached to the compressor opening.The filter must be connected to a rubber hose of the desired size.Next, all that remains is to try the operation of the device.
Using a syringe
Take a plastic tube, cut off three parts, the size of each should be 10 cm.Attach them to the t-shirt.The result is a tee with three branches.
Attach the spray nozzle to the central outlet.Install valves on the manufactured side outlets.
In this case, it is important that one opens upwards and the other opens inwards.To avoid confusion in the future, you should draw arrows indicating the direction of the air.
Use of plastic bottles
A fairly simple pump for penis enlargement can be made from ordinary plastic bottles.It is just important to choose different sizes of containers.The larger one requires cutting off the top to create a cylinder shape.
Make holes in the bottom of the second bottle and insert it into the first container.It is important that there is not a large gap between the walls.Then you need to attach a hose to a large container.You can take it from the bicycle tire pump.
Maintenance of the device
To maximize the life of your enlarger, take proper care of it.If the device has just been purchased and has not yet been used, it is necessary to wash it thoroughly with soap, then dry it and treat it with any antiseptic.In addition, the device must be washed after each use.
Do not treat the pump with hydrogen peroxide or boiling water, and do not use lubricants containing grease during the procedure.Otherwise there is a high risk of injury.
Who and when was vacuum erection therapy proposed and what is its significance?
The idea of vacuum erector therapy was introduced into the practice of modern andrology by the American citizen G. Osbon, who in the early 1960s used the first vacuum erector for his own needs.Mr.Osbon himself suffered from erectile dysfunction (ED), and at the time it was believed that ED was primarily psychogenic in origin.But psychotherapy obviously didn't help Mr. Osbon because he suffered from organic ED.Realizing that erection of the penis occurs due to the flow of blood to it, the talented inventor proposed that if the penis is placed in a pressurized cylinder under atmospheric pressure, blood will begin to flow into it under the influence of a vacuum, which should lead to an erection.This is how the first vacuum erector was created, consisting of a cylinder and a pump connected to each other.In the first half of the 1970s, the serial production of vacuum travelers designed by G. Osbon began.In addition to the device itself, this American inventor also created a method to use it to overcome ED, which was later called the Osbon technique.The meaning of vacuum erection therapy or the Osbon technique is to achieve an erection of the penis placed in a vacuum cylinder, as well as to maintain the resulting erection with the help of compression rings.
- 90% efficiency;
- There is no need to use drugs that have side effects;
- Non-aggressive treatment method;
- Helps to create an erection while maintaining all precautions.
Sex shops often advertise and sell vacuum pumps to increase potency.How effective are they?
First of all, you should know that in the whole world, actually working vacuum setters for medical purposes (approved for medical use) are distributed only through doctors, medical institutions or pharmacies.This is due to the fact that only a doctor specially trained in vacuum therapy in andrology can teach the effective and safe use of a vacuum erector.Second, sex shops are always interested in buying cheaper systems, which are mainly manufactured in China and other Asian countries, in order to earn more from sales.These systems are inexpensive for the following reasons:
- Cheap materials and low quality in manufacturing and assembly.
- Low-power pump, which is not able to create and maintain a sufficiently low pressure in the cylinder, which is necessary to ensure sufficient blood flow to the penis and the occurrence of an erection.Sometimes, instead of a pump, an ordinary rubber bulb is simply attached to a primitive little cylinder, which is not capable of creating any vacuum at all.
- Imperfect design and poor quality of compression rings.
- Short lifespan.
Of course, no one in a sex shop is able to give you complete and truthful information about all the features of using a vacuum travel because... This requires special education.Therefore, it will most likely just be a waste of money for you to buy such a "sex shop" vacuum cleaner.
How is a vacuum erector for ED used for vacuum erection therapy using the Osbon method?
First of all, it must be understood that a vacuum erector, like all other conservative methods of treating ED or male impotence, does not cure it completely, but only allows to obtain and maintain an erection necessary for sexual intercourse.
The vacuum setup kit always includes a vacuum pump, a vacuum cylinder, compression rings and a personal water-soluble lubricant, instructions and/or a video cassette on how to use the unit.Sometimes the kit is supplemented with a device for putting compression rings on the cylinder and some other devices.The use of an erector vacuum cleaner to achieve and maintain an erection followed by intercourse involves several stages:
Step 1. The compression ring is pre-assembled on the lubricated edge of the vacuum cylinder.The penis is also lubricated and placed inside the cylinder.Using a pump, a vacuum is created in the cylinder.It is important that no air is sucked in between the edge of the cylinder and the skin.To do this, the cylinder must be pressed quite firmly against the body, and a lubricant applied to the edge of the cylinder helps to seal the contact.Sometimes you should shave the skin around your penis.If necessary, adjust the vacuum depth with the pressure release button on the pump.Lubricating the penis with lubricant helps it slide better into the cylinder as it begins to tighten.
Step 2. Under the influence of a vacuum, the penis is filled with blood and becomes erect.When working with a vacuum pump, you should achieve the greatest possible tension on the penis.A signal that the erection has reached its maximum is heaviness and moderate pain in the head of the penis.It should be understood that the erection obtained with the help of a vacuum erector may not be as complete as your own erection, which you had before the development of ED.
Step 3. The compression ring is released from the cylinder to the base of the penis, which is held by this ring in an erect position.The patient can have intercourse.The compression ring can remain on the penis for up to 30 minutes.
Step 4. After intercourse, the compression ring is removed and the penis returns to a calm state.
When using a vacuum erector, keep in mind that keeping a compression ring on the penis for more than 30 minutes can lead to circulatory problems and can cause problems such as swelling and even necrosis of penile tissue, decreased sensitivity of the glans penis, progression of scarring in the corpora cavernosa of the penis, and worsening of ED.Under no circumstances should you fall asleep after intercourse with the compression ring not removed from the penis.
To make it easier to use the vacuum erector and facilitate intercourse, you should use the water-soluble lubricant that comes with the device.The size of the compression ring is selected individually depending on the diameter of the penis.It is possible to put on 2 compression rings at the same time.
For what other purposes can a vacuum erector be used in andrology?
Of course, the main area of application of a vacuum erector in andrology is its use to achieve an erection and perform sexual intercourse.This area of application will be of interest to men who are unable to achieve independent erections or suffer from ED.However, there are several other areas where a vacuum erector can be used by both healthy men and patients suffering from various diseases of the penis.
- Vacuum massage.In our country, this area of using a vacuum erector is called local negative pressure therapy or LNP therapy.Its idea is that periodic vacuuming of the penis leads to stretching of the cavernous tissue, improves its blood supply, increases its elasticity and removes mild forms of organic ED, as well as prevention of erectile dysfunction.Unfortunately, at present there is an insufficient number of scientific works that statistically correctly confirm the correctness of this idea.However, we consider this scope of use for a vacuum erector justified and recommend our patients to use a vacuum erector both to prevent ED and to improve the quality of their own erections.Sometimes LOD therapy is used for complex treatment of organic ED along with erectile dysfunction pills and intracavernous pharmacotherapy.
- Penis enlargement.According to some researchers, vacuuming the penis, stretching the hollow bodies helps to increase the length and width of the penis.As in the case of vacuum massage, not all researchers agree on the advisability of using a vacuum erector to enlarge the penis.There is no generally accepted method of using a vacuum recorder for this purpose.However, it is known that vacuum erectile therapy has proven itself as an auxiliary method for penis enlargement, which is used in combination with surgical enlargement.
- Direction of penis.For congenital (intracavernous chord) or acquired (Peyronie's disease) curvatures of the penis, when its deviation from the horizontal axis does not exceed 45°, according to some researchers, it is possible to effectively use a vacuum erector to straighten the penis.
- Overcome premature ejaculation.In case of premature ejaculation, the penis can be held erect using compression rings, which are included in the vacuum erector set and placed on the base of the penis after an erection.
- Complementary erection.A vacuum erector can be used to "supplement" one's own erection if it is not hard enough, or to achieve better swelling of the head of the penis in patients who have undergone a penile prosthesis.
- Sexual rehabilitation program after radical prostatectomy and other radical operations for malignant tumors of the pelvic organs.
In recent years, due to the improvement in the quality of diagnosis of prostate cancer, this disease is increasingly detected at an early stage, when it is very likely to be completely cured with surgery - radical prostatectomy.The disadvantage of this operation is that 20 - 100% of those operated on, depending on the technique of performing the operation and the experience of the surgeon, develop erectile dysfunction.If, in the first months after the operation, the patient participates in a rehabilitation program for erectile function, the chance of restoring his own erection increases significantly.This program, an integral part of which is the use of a vacuum erector, is described in detail on our website in the section on prevention of urological diseases.
What does a penis look like after a vacuum pump?
Side effects:
- There is insufficient hardness at the base of the penis;
- Red and purple spots appear on the skin;
- Unpleasant feeling of erection;
- The skin color darkens, becomes dry and numb;
- Decreased erection for a short time;
- Pain from a hematoma on the penis.
Fastening concept
Compression is a method by which men can increase the thickness of their penis.This method is considered really extreme, so many doctors are against such experiments.Natural penis enlargement is achieved by creating increased blood pressure in the penis.

Doctors warn that this technique is not for beginners.The consequences can be severe
The procedure is carried out strictly according to the established technique.If you deviate from it, the risk of developing serious consequences increases.These include:
- Changing the color of the skin of an organ to a dark shade.
- Numbness in the head.
- Formation of hematomas in the genital area.
- Stagnant blood processes in the tissues of the penis.
- Damage and breakage of capillaries.
- Impairment of erection.
To prevent such complications from occurring when practicing clamping, first try more gentle techniques, for example, jelqing, Yuli.
Preparation for therapy
Before starting the session, consult with a specialist.Only a specialist will be able to examine the patient and identify contraindications to the use of vacuum therapy.Sometimes the cause of contraindications can be psychological aspects that can be easily eliminated.
Before putting the pump into use, it must be washed with warm water and soap.It is forbidden to boil or pour boiling water over it.Furthermore, the pump should not be used by more than one person.The pump is quite a fragile thing and must be used carefully and not thrown away.The vacuum must be stored in a dark and dry place at a temperature of no more than 35 degrees.
Algorithm for performing the procedure:
- Before putting the pump on, it is better to lubricate its base with a special lubricant;
- Too greasy a lubricant will render the vacuum pump useless;
- Place the penis at the base of the pump and press it firmly against the scrotum;
- Before starting the session, lubricate the penis with ointment to increase blood supply;
- Next, the air must be pumped out of the pump, thereby increasing the pressure in the pump and creating blood flow to the organ;
- Hold the vacuum with your left hand, and with the other, use a bulb to pump out the air from inside;
- The hole in the flask must be clamped, and if there is a valve, close it;
- During the session, you can see a slight increase in erection and hyperemia of the penis.After half a minute, open the valve and let air enter the flask;
- The procedure takes about 20 minutes.During this period, an erection can occur in a minute approximately 20 times.
Contraindications
There are a number of diseases and conditions for which the use of such a device is not recommended.Absolute contraindications include:
- Diseases of the heart and blood vessels.
- Thrombosis, atherosclerosis.
- Varicose veins in the small pelvis.
- Diseases of an infectious or inflammatory nature.
- Diseases of the genital area (urological).
- The presence of tumor formations of different origins.
- Childhood or youth.
- Mental disorders.
- Blood coagulation disorder.
Classes are also not completed if they cause discomfort or are accompanied by pain.In this case, they will not bring any benefit, but will only harm human health.
There are no other serious contraindications;the device can be used by men of all ages from 18 to 65 years.















































